Cabinet shop scheduling software and cabinet manufacturing software for shops that plan jobs in a spreadsheet
Cabinet shop scheduling software puts every job on the machines and benches it really uses (the CNC router, the edgebander, assembly and the finish booth), counts the hours each one has this week, and tells you which kitchen will miss its install date while you can still move people. ProductionPlanning.ai does that for custom cabinet and casework shops with 5 to 60 people, in a browser, from 149 USD per plant a month with unlimited users. Design, cut lists and CNC files stay in the cabinet software you already use; the shop schedule is what changes.
Free for 14 days on your own orders and machines. No card.
Machine shop, This week's schedule, finite capacity per work center
- On time
- Late
- Changeover
On time
0%
Bottleneck
0%
Shortages
0
Why a cabinet shop schedule breaks on the whiteboard
Most shops plan the week by install date: the kitchen that installs Thursday gets cut Monday. That works until two or three jobs land in the same week, because every job flows through the same short line of stations and each one has a different limit.
- The CNC router and the edgebander are often run by one person, so a big nest on Monday pushes banding for the next job into Tuesday
- Assembly hours grow with box count and with specials such as a reception desk, a pantry pull out or an island with seating
- The finish booth can only take what assembly has released, so it sits idle early in the week and gets buried on Thursday
- Install dates are fixed with the homeowner or the general contractor, so a slip of one day costs a crew day and a phone call nobody wants to make
- A remake or a change order on Wednesday reshuffles everything behind it, and nobody can say which job it pushes
The whiteboard shows that every station has enough hours for the week. It does not show the order the jobs reach each station, and that order is where late installs come from.
A worked example with four jobs and one finish booth
Here is a real shaped week for a 14 person shop running one shift, 07:00 to 15:30, Monday to Friday. At 85 percent efficiency each person gives 6.8 productive hours a day. One operator runs the CNC router and the edgebander, two people assemble, and one finisher runs the spray booth. Each box takes about 9 minutes on the router (1.5 sheets at 6 minutes a sheet), 8 minutes on the bander, 35 minutes in assembly and 15 minutes in finishing.
| Job | Boxes | Router and bander | Assembly | Finish | Due to install |
|---|---|---|---|---|---|
| K2 vanity set | 8 | 2.3 h | 4.7 h | 2.0 h | Wednesday |
| K1 kitchen | 32 | 9.1 h | 18.7 h | 8.0 h | Thursday |
| K3 reception desk and 20 boxes | 20 plus desk | 7.2 h | 21.7 h | 8.0 h | Friday |
| K4 kitchen | 26 | 7.4 h | 15.2 h | 6.5 h | Next Tuesday |
| Week total against capacity | 26.0 of 34 h | 60.3 of 68 h | 24.5 of 34 h |
Every station is under capacity, so the whiteboard says the week works. The schedule says otherwise. With one person on both machines, K1 does not leave the bander until Tuesday afternoon, assembly finishes it Thursday morning and the booth hands it over on Friday, one day after the install crew was booked. K3 finishes in the booth on Monday, one working day late, and K4 is ready on Tuesday with no slack at all.
The scheduler shows that on Monday morning. You then test options as plan versions. Putting an installer on the edgebander Monday to Wednesday lets the router and the bander run side by side: K1 is ready Thursday, K3 Friday afternoon and K4 the following Monday, all on time, for 20 hours of an installer's week that was mostly shop cleanup anyway. That is the decision the owner actually needs, with the cost in front of them.
How ProductionPlanning.ai models a cabinet shop
You do not need cabinet specific software to get a schedule you can run. Each part of the shop maps to something the scheduler already handles.
- Each station is a work center with its own shifts and people: CNC router, edgebander, boring and doweling, assembly benches, finish booth, and install if you want the crews on the same plan
- Each job has a routing with time per box or per sheet, so a 32 box kitchen and an 8 box vanity load the stations in proportion
- Specials such as a desk, a hutch or curved work are their own line on the job with their own hours
- Setup time per product family covers a door style or color change in the booth, and similar jobs are grouped on the Plant plan
- Efficiency per work center covers the gap between book time and what your crew really does
Setup is an afternoon: add the stations and shifts, import open jobs from a spreadsheet, and publish. The how it works page shows the four steps, and the job shop scheduling software page shows how one shared queue per station works for make to order work.
What the shop gets from a finite schedule
- A projected ready date for every job next to its install date, with late jobs marked by the days they will miss
- The station that limits the week named, so an extra hand goes where it changes a date rather than where it looks busy
- Plan versions on the Plant plan, so a change order or a remake is tested before anyone moves a cart
- A queue per station on a screen in the shop, where people mark jobs started and finished (Plant plan)
- Material shortages per job and date, so a hardware or door delivery that lands Wednesday does not hide behind a Monday start
- One shared schedule for the owner, the shop lead, the installers and the person who books install dates, without paying per seat
Sales and the install coordinator get dates they can promise. Our article on the manufacturing bottleneck explains why the busiest looking station is often not the one that sets the date, which is what happened to K1 above.
Cabinet manufacturing software compared honestly
Cabinet shops usually mix three kinds of software. Each one wins somewhere.
| Route | What it does well | Scheduling depth | How it is priced | Best for |
|---|---|---|---|---|
| Spreadsheet or whiteboard | Free, everyone understands it | Install dates only, no sequence per station | Shop lead time | One crew, one job in the shop at a time |
| Cabinet design and CNC software | Drawings, cut lists, nesting, CNC output, job pricing | Little or none, the job leaves the software as parts | Per seat licenses, from each vendor | Every shop with a CNC router, you keep it either way |
| Cabinet shop management software or woodworking ERP | Estimates, purchasing, job costing, project tracking and a schedule | Varies, often a calendar by job rather than finite hours per station | Usually per user, often on a quote, with setup | Shops of 30 people and up that want one system for the office |
| Dedicated scheduler such as ProductionPlanning.ai | Finite capacity per station, late jobs flagged, plan versions | Every station, every shift, every job in sequence | 149 USD per plant a month on Line, 429 USD on Plant, unlimited users | Shops whose design and estimates already work and whose problem is late installs |
Where a woodworking ERP is the better buy: if you need estimates from drawings, purchasing and job costing in one place, buy a system built for that and check how it schedules the stations before you sign. If your design software and books already work and installs still slip, the missing piece is the schedule. Shops already pricing a job shop ERP for this can compare it on our JobBOSS alternative page. The Architectural Woodwork Institute publishes the quality standards most commercial casework is specified against, which is worth knowing before you plan a millwork package like K3.
Which plan a cabinet shop needs
The Line plan covers up to 10 work centers and 500 open orders, which suits most shops with one router, one bander, a few assembly benches and a booth. Most shops take Plant at 429 USD a month, because grouping by door style and color, plan versions, spreadsheet import and the station queues on the shop floor are in Plant. Paying yearly halves both prices. All plans and limits are on the pricing page.
For background on the process itself, the edge banding overview explains why banding is so often the hidden queue in a panel shop.
Cabinet shop scheduling questions buyers ask
What is the best scheduling software for a cabinet shop?
The best one fixes the problem you have. If you need drawings, cut lists and CNC files, that is cabinet design software, and you keep it. If design and estimates work but installs still slip, a finite capacity scheduler that knows your router, bander, assembly and booth hours shows late jobs days ahead and lets you test fixes first.
How do you schedule production in a cabinet shop?
Give every job a routing through your stations with hours per box or sheet, load each station with its real shift hours, and sequence the jobs by install date. Then check the ready date of every job against its install date, because a station that is under capacity for the week can still release a job a day late.
How much does cabinet shop scheduling software cost?
Cabinet shop management systems and woodworking ERPs usually price per user, often on a quote with setup fees. ProductionPlanning.ai publishes its price: 149 USD per plant a month on Line and 429 USD on Plant, with unlimited users, no implementation fee, and half price when paid yearly.
Does it replace Cabinet Vision, Mozaik or Microvellum?
No. Those programs draw the cabinets, build cut lists and write the CNC files. We schedule the shop: which job runs on which station, when, and which install will slip. Most shops run both, with job hours exported to a spreadsheet and imported into the schedule.
Can installers and the finish booth be on the same schedule?
Yes. Install crews and the booth are work centers like the router, each with its own hours. A job then shows one ready date for the shop and one for the install, and a late booth day moves the install date on the plan before the crew arrives at an unfinished kitchen.
See which install will slip before the week starts
Run the demo with your own stations and a real week of jobs, add a change order, and see which install moves.
Your data stays yours. Export or delete it any time. No card to try the demo.