The short answer for a plant owner
Pick SYSPRO if you run one or two plants, make and distribute stock or repeat products, and want a system your team learns in months rather than a year. Pick Epicor Kinetic if you run engineer to order or configure to order work with deep routings, quoting from a product configurator and several sites that need one platform. Both are full manufacturing ERPs with financials, purchasing, inventory, MRP, jobs and costing on one database.
The comparison most sites skip is the schedule. In both systems the finite sequence per machine, the part that tells you which job runs next and which order will ship late, is priced as its own module and needs clean routings before it says anything useful. If that is the problem you are buying an ERP to solve, read the cost table below with that in mind. Our SYSPRO pricing and Epicor Kinetic pricing articles list every source behind the figures.
How SYSPRO and Epicor charge a manufacturer
| Line | SYSPRO | Epicor Kinetic |
|---|---|---|
| Published list price | No, quote through a partner | No, quote from Epicor or a partner |
| Subscription per user | 75 to 250 USD a month (ERP Research 75 to 200, SoftwareConnect 150 to 250) | 100 to 200 USD a month (ERP Research), 125 USD per top10erp |
| Minimum or base fee | Small cloud setups from 1,500 to 2,500 USD a month per SoftwareConnect | 10 user minimum per top10erp, 1,500 USD a month platform fee per ERP Research |
| License model change | Named user subscription only for US customers after December 31, 2026 | Cloud subscription, on premise perpetual still sold |
| Implementation | From about 30,000 USD, 3 to 6 months per ERP Research | From about 50,000 USD, 5 to 10 months per ERP Research |
| Scheduling | Factory scheduling sold as a module | Advanced Planning and Scheduling sold as a module |
SYSPRO describes its products and partner network on syspro.com, and Epicor describes Kinetic on epicor.com. Neither shows a price, so every number here is third party and should be checked against a written proposal.
The three year cost for a 20 user plant
Assumptions: 20 named users who plan, buy, receive, cost or ship. Shop floor staff who only clock jobs are left out on both sides, since both vendors price them lower. Implementation is the source floor in the low column; the middle and high columns are our assumptions for manufacturing scope, inside the ranges ERP Research publishes (30,000 to 500,000 USD for SYSPRO, 50,000 to 1,000,000 USD for Epicor).
| Line | SYSPRO low | SYSPRO middle | SYSPRO high | Epicor low | Epicor middle | Epicor high |
|---|---|---|---|---|---|---|
| Per user a month | 75 | 150 | 250 | 125 | 100 plus 1,500 platform | 200 plus 1,500 platform |
| Subscription a month | 1,500 | 3,000 | 5,000 | 2,500 | 3,500 | 5,500 |
| Subscription for 36 months | 54,000 | 108,000 | 180,000 | 90,000 | 126,000 | 198,000 |
| Implementation | 30,000 | 75,000 | 150,000 | 50,000 | 100,000 | 250,000 |
| Three year total | 84,000 | 183,000 | 330,000 | 140,000 | 226,000 | 448,000 |
How the rows are built. SYSPRO middle: 20 users at 150 USD is 3,000 USD a month, 108,000 over 36 months, plus 75,000 to implement. Epicor middle: 20 users at 100 USD plus the 1,500 USD platform fee is 3,500 USD a month, 126,000 over 36 months, plus 100,000 to implement. ERP Research's own Epicor example of 5,000 to 8,000 USD a month all in for 25 users sits between our middle and high columns.
The gap at the same level of scope is about 40,000 to 120,000 USD in Epicor's disfavor, and most of it is implementation. Two quotes for the same plant can still differ by six figures, so ask both vendors for the manufacturing part of the estimate in writing before you compare.
Where each one leaves the production schedule
This is the part to test in a demo with your own orders, not the sample company.
- SYSPRO plans materials and capacity in its MRP and requirements planning. A drag and drop finite sequence per machine comes from its factory scheduling module, priced on top, and it is only as good as the routings and run times you load into it
- Epicor Kinetic schedules jobs in the core and sells Advanced Planning and Scheduling as an add on for finite, constraint based sequencing. Plants that buy APS usually spend part of the rollout cleaning routings before the plan can be trusted
- In both, anyone who needs to see the plan needs a license. In a 40 person plant that is the planner, the shift leads and sales, which is how a 20 user quote becomes 28
So the honest comparison for a plant whose real pain is late orders is not only SYSPRO against Epicor. It is an 84,000 to 448,000 USD ERP project against keeping the ERP you have and adding a schedule. ProductionPlanning.ai is that schedule: finite capacity per machine and shift, setup times, late orders flagged days ahead and unlimited users, at 149 USD per plant a month on Line or 429 USD on Plant. Over the same three years that is 2,682 USD or 7,722 USD paid yearly, with no implementation fee. Many shops run it next to SYSPRO or Epicor rather than instead of them.
Which one fits which plant
| Your situation | Better fit | Why |
|---|---|---|
| One or two plants, make to stock or repeat work, plus distribution | SYSPRO | Lower estimates, shorter rollout, strong in mixed manufacturing and distribution |
| Engineer to order or configure to order with deep routings | Epicor Kinetic | Product configurator, job costing and APS built for complex jobs |
| Several sites that must share one platform and one release train | Epicor Kinetic | Multi site scope and a larger direct services team |
| Existing SYSPRO customer facing the 2026 subscription switch | Price the renewal first | Moving ERP costs another implementation, and the renewal is usually cheaper |
| Books, stock and orders already work, orders still ship late | Neither, add a scheduler | The missing piece is a finite schedule, not a new system of record |
If the last row is your plant, our SYSPRO alternative and alternative to Epicor pages compare the scheduling side directly, and the best production scheduling software roundup lists the smaller options next to each other.
What to ask both vendors before you sign
- Which license does a planner, a shift lead and a salesperson each need, and what does each cost
- Is finite scheduling per machine in the quote, or a separate module, and what does it add a year
- What is the implementation estimate for manufacturing scope, and which parts are fixed in writing
- How long until the first schedule the floor actually runs from, not until go live of the ledger
- What does year two cost, including support, and is the renewal increase capped
Put the answers in the table above for both columns and the comparison does itself.
Questions people ask about SYSPRO vs Epicor
Is SYSPRO cheaper than Epicor?
Usually, yes, at the same scope. On third party estimates, 20 SYSPRO users with implementation run about 84,000 to 330,000 USD over three years, against about 140,000 to 448,000 USD for Epicor Kinetic. Most of the gap is implementation, which starts near 30,000 USD for SYSPRO and 50,000 USD for Epicor.
Is SYSPRO better than Epicor for manufacturing?
For single plant makers and distributors with repeat work, SYSPRO is often easier to learn and quicker to roll out. For engineer to order shops with deep routings, configurators and several sites, Epicor Kinetic usually goes further. In both, finite scheduling per machine is an extra module, so test it with your own orders.
How long does a SYSPRO or Epicor implementation take?
ERP Research puts SYSPRO at about 3 to 6 months and Epicor Kinetic at about 5 to 10 months. Data migration, routings and training take most of that time. A finite capacity scheduler that imports open orders from a spreadsheet can publish a first schedule the same afternoon.
Do I need a new ERP to fix late orders?
Not always. If orders, stock and invoices already work in your current system, late orders usually come from a schedule that ignores machine capacity. A finite capacity scheduler next to the ERP fixes that in an afternoon, for 149 or 429 USD per plant a month with unlimited users.
Fix the schedule before you pick the ERP
Run the demo on a sample week, or start on the Line plan with the whole plant included. You will see your bottleneck and your late orders the same afternoon, whichever ERP you choose later.